The long spiral pile driver should add a bracket sprocket, guide wheel, and drive wheel with lubricating grease at least once a week. When adding grease, the track should rotate freely from the ground.
The exposed gear of the main hoisting of the long spiral pile driver, the pillar guiding power head sliding, and the diagonal support screw should be checked for lubrication every day, and lubricating grease should be added in a timely manner.
The copper sleeves at both ends of the main drum of the long spiral pile driver should be filled with lubricating grease at each shift. There is a grease nozzle inside the rotating bracket, which should be filled every 100 hours during operation. The inclined support ball socket should be lubricated with oil and checked and replenished daily. When the inclined bracket rotates, attention should be paid to the oscillation phenomenon. If swinging occurs, the copper nut in the guide copper sleeve or diagonal bracket should be replaced in a timely manner.
Every day, attention should be paid to whether there is a series of ups and downs under the ball socket of the diagonal support screw. If there is a series, work should be stopped immediately. The end cap below the extension beam should be removed to place the inclined support under pressure. The lower nut should be tightened and locked. If necessary, nuts should be welded by electric welding. When the winter temperature drops below zero degrees, it is necessary to check if there is water in the extension beam and remove it in a timely manner to prevent the nut from loosening due to freezing.
液压油的第一次换油时间为200小时，然后每1000小时更换一次。该装置由齿轮箱操作。有必要观察内部润滑油是否达到规定的油位。如果不够，应注入HJ-10 (GB443-64) 机械油，并在倾斜支撑调节机构中注入锂基润滑油。设备的每个滑轮组，轴承和其他旋转部件都装有油嘴，并应按时添加锂基润滑脂。动力头的滑动、滑轮尼龙套的磨损、主绕组的铜套应及时更换。每个工作日应清洁履带链，以确保履带的正常运行。当维修需要焊接时，接地线必须可靠地连接到焊接区域。支持机构应根据支持说明中指定的要求使用和维护。
During work, we should observe the main weld seam cracks of structural components every day, identify problems, and promptly address them. If the problem is serious, the manufacturer of the long spiral pile driving mechanism should be notified to assist in solving the problem.